kondor101
929 posts
Joined 02/2008
"use multiple panels" is something I use.
Basically it changes the function of <-New Line->, if it is checked then it makes each <-New Line-> create a separate box, so you have a choice. If you want all the stats in one box leave it unchecked. If you want to be able to move the various stats around and about the player then you can check the box and have some stats above the player, some below, and maybe some left and right of the player.
Also, you can hold "CTRL" while dragging some of the stats as it means the just move for that player and not every player.
Just my general pref, I do not use the name[abr]. But it is very useful if your HUD has gone wonky and you want to know who is who again. So you might want to remember it exists even if you do not generally use it as you can turn it on and off any time.
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
VJunks
21 posts
Joined 02/2008
Entity
Founder
7146 posts
Joined 11/2006
yeahgoforit
53 posts
Joined 03/2008
theRabidDoG
53 posts
Joined 01/2008
Boomer
1550 posts
Joined 06/2007
Yes
Sometimes I have had slight problems on Betfair with it but hitting the "mucked Cards Test" tab under "Table Preferences" causes AA-TT to appear in each of the areas the hand should and appears to reset the HUD's mucked hand display so the hands appear next time.
Dunno if anyone else was having similar problems with it. This is the only way i've found to solve it so far...a little annoying but suppose i can handle it, it's a great piece of software.
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
Entity
Founder
7146 posts
Joined 11/2006
Sometimes I have had slight problems on Betfair with it but hitting the "mucked Cards Test" tab under "Table Preferences" causes AA-TT to appear in each of the areas the hand should and appears to reset the HUD's mucked hand display so the hands appear next time.
Dunno if anyone else was having similar problems with it. This is the only way i've found to solve it so far...a little annoying but suppose i can handle it, it's a great piece of software.
Have you tried the new HUD?
www.rvgsoftware.com/hm/newhud.zip
Rob
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
VJunks
21 posts
Joined 02/2008
Thanks for Entity and yeahgoforit for quick answers. This Holdem Manager seems to be a pretty attractive choice to Pokertracker. When the support for Pokertracker 2 ends, I really need to consider whether to update the Pokertracker or to start using HEM.
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
nomdeguerre
43 posts
Joined 06/2007
This was a useful vid, thanks.
PT3 is due to be out on May 15th, so I'm also not sure which program to go for.
The HUD stats seem fairly close together. Is it possible to move individual numbers as it in using PokerAce HUD?
Also, does this program have anything that PT3 is missing, or vice-versa?
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
kondor101
929 posts
Joined 02/2008
The HUD stats seem fairly close together. Is it possible to move individual numbers as it in using PokerAce HUD?
yes, thats what I was pointing out the "use multiple panels" does in the first reply.
Something else that might be worth pointing out as been as a few people have mentioned about last cards, you can grab them and move them about with the right mouse button if they are in they need moving a bit and clicking on the $xx.xx in last hands re-shows them if you missed them.
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
tubasteve
7697 posts
Joined 11/2007
Entity
Founder
7146 posts
Joined 11/2006
My hud works perfectly fine as is, is there a reason to get the new version?
IIRC they've rewritten a lot of it so that you can use it and see stats when you're not sitting at a table, to use it for table selection a bit more. I'm not 100% certain of this but I know that the new version should have it soon if it doesn't already.
Rob
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
Boomer
1550 posts
Joined 06/2007
kondor101
929 posts
Joined 02/2008
updated today, and installed the new HUD.
btw, the new hud as a bug that if the opacity is turned up full the back ground goes completely transparent. Fix it easy by just turning the opacity down one notch.
There was a mousehook.dll in with the hud, no idea where that goes so put it in the same place.
That analysis window is the dogs cogs now.
Posted almost 4 years ago
Reply to Topic
Reply w/Quote
nomdeguerre
43 posts
Joined 06/2007
brianmk24
4 posts
Joined 02/2007
2fouroffsuit
Coach
1631 posts
Joined 01/2008
Blixx
91 posts
Joined 03/2008
Thanks for making these tool time videos. I managed to get the trial HEM + Postgres installed and the hud configured in about 30min after watching them.
Will be upgrading and doing the mass import of datamined hands as soon as the DC-HEM discount is available.
Posted over 3 years ago
Reply to Topic
Reply w/Quote
Zyphex
2 posts
Joined 07/2008
lpoolreds
4 posts
Joined 05/2008
spotDEspot
914 posts
Joined 06/2008
how do you display the "fold to 4bet" and "4betrange" in the pop up?
i only have the "3bet" and "4bet%"...
It is restricted in the trial version I think - buy it and you get a sh1t load more stats you can use.
Posted over 3 years ago
Reply to Topic
Reply w/Quote
IM11AF
47 posts
Joined 07/2008
My HUD stats are showing up in random places all over the screen and nowhere near the player they should be next to. Is anyone else having this problem? How is this fixed?
I'm having the same problem. It doesnt save my positioning!
Posted over 3 years ago
Reply to Topic
Reply w/Quote
DJ Sensei
Exec Producer
3094 posts
Joined 10/2007
My HUD stats are showing up in random places all over the screen and nowhere near the player they should be next to. Is anyone else having this problem? How is this fixed?
If you're playing on a site where you have a preferred seat position, you may need to adjust your settings: HUD Options > Seating Preferences and then select the right ones
Posted over 3 years ago
Reply to Topic
Reply w/Quote
bilirubin
38 posts
Joined 05/2008
Hi DJ and anybody else reading this,
This might be a dumb question but here goes, I have loaded HEM and got it working with Stars, then I watched this video and all seemed to be looking good, however I have decided that due to me not having used HEM or PT before, plus based on some other advice from the "Software" forum I am going to keep my stats down in the region of 6, 7 or 8 until I get used to it.
What I am struggling to understand is how do you get to the numbers that you put against each stat, in this vid DJ clicks on a stat, lets say PFA, he chooses a colour then puts a number against it, he does this three times per stat to show fish through to shark, where do these numbers come from?
Before I continue I am not saying I do not trust DJ's choice of numbers, but I just need it cleared up if his choice is the choice of all or do I put in my own to suit my own game, there are some vids on the HEM site but for some reason I cannot get them to work.
Thanks Guys
Mike
Posted over 3 years ago
Reply to Topic
Reply w/Quote
George Jackson
formerly Hollywood Cole
125 posts
Joined 07/2008
I just want to be 100% sure. If I set my hud up exactly like you did in regards to the vpip,pfr, agression factor and total hands (only stats i use) is the ranges in the video compatible with fr nlhe ??
Posted over 3 years ago
Reply to Topic
Reply w/Quote
DJ Sensei
Exec Producer
3094 posts
Joined 10/2007
Hi DJ and anybody else reading this,
This might be a dumb question but here goes, I have loaded HEM and got it working with Stars, then I watched this video and all seemed to be looking good, however I have decided that due to me not having used HEM or PT before, plus based on some other advice from the "Software" forum I am going to keep my stats down in the region of 6, 7 or 8 until I get used to it.
The most important stats (imo) are VPIP, PFR, Aggression, # of hands, 3bet %, and fold to 3bet. As long as you have those in place you should be fine, anything else you add is great if you know how to use it and aren't distracted by it or anything.
What I am struggling to understand is how do you get to the numbers that you put against each stat, in this vid DJ clicks on a stat, lets say PFA, he chooses a colour then puts a number against it, he does this three times per stat to show fish through to shark, where do these numbers come from?
All of the numbers I used come from my own personal experience and my rough estimates of the kind of ranges that various player-types will be likely to have.
Before I continue I am not saying I do not trust DJ's choice of numbers, but I just need it cleared up if his choice is the choice of all or do I put in my own to suit my own game, there are some vids on the HEM site but for some reason I cannot get them to work.
Thanks Guys
Mike
I wouldn't stress too much about it. The whole point of the HUD is to give you a little extra assistance when deciding what play to make, if you don't have specific reads on your opponent. If you're making every decision based on something in your HUD, then you're probably doing it wrong!
Posted over 3 years ago
Reply to Topic
Reply w/Quote
DJ Sensei
Exec Producer
3094 posts
Joined 10/2007
I just want to be 100% sure. If I set my hud up exactly like you did in regards to the vpip,pfr, agression factor and total hands (only stats i use) is the ranges in the video compatible with fr nlhe ??
Those ranges are a little more designed towards 6max, but they'd work for FR too. Its not like the ranges and colors are crucial, they just help make things easier to interpret.
Also I'd highly recommend that you start using 3bet and fold to 3bet stats as well. At the very least, add them and just see what kind of players have different stats in those categories.
Posted over 3 years ago
Reply to Topic
Reply w/Quote
richsmoove
15 posts
Joined 08/2009
can some1 help? just purchased hem and it not importing at all. i shut off the user account thing like they said but still cant figure it out. ive had it for 3 days the 1st day it was at least showing which table i was at and it said it was importing every 5 seconds,but since then nothing works.
Posted over 2 years ago
Reply to Topic
Reply w/Quote
George Jackson
formerly Hollywood Cole
125 posts
Joined 07/2008
willy mc coy
1 posts
Joined 04/2010
DJ Sensei
Exec Producer
3094 posts
Joined 10/2007
i cant add post flop aggression.. is it just because of the trial version or am i just to stupid to find it??
No idea, I'd post some screenshots or something that will actually be useful to help you with. Also consider posting on HEM forums, you'll probably get a quicker/better response there.
Posted almost 2 years ago
Reply to Topic
Reply w/Quote
cabledave
8 posts
Joined 03/2010
Just got set up. This video was very helpful. In the video it explained that if the HUDs were misplaced to just right click and drag to proper position. Which works fine however after showdown and the replay comes up the hands are out of place. Is this a setting I need to change?
Posted over 1 year ago
Reply to Topic
Reply w/Quote
DJ Sensei
Exec Producer
3094 posts
Joined 10/2007
Just got set up. This video was very helpful. In the video it explained that if the HUDs were misplaced to just right click and drag to proper position. Which works fine however after showdown and the replay comes up the hands are out of place. Is this a setting I need to change?
If this is because you have a preferred seat (and thus automatically shift to always be in it) then theres a setting you can change to fix that. Go to HUD Options -> Seating Preferences and enter in the # of the seat(s) you prefer. It might take some experimenting to figure out the #'s of your seat, but generally they work their way clockwise starting from the dealers left.
Posted over 1 year ago
Reply to Topic
Reply w/Quote
Ryllban
11 posts
Joined 10/2009
sammut
16 posts
Joined 03/2011
sammut
16 posts
Joined 03/2011
McBethK
89 posts
Joined 09/2008
Hello, really great video that shows the steps to do this
But how do I set up the HUD with letters? For example, this is how you have it know 30/40/20. And I was whondering how can you make it F3b: F4b: Cb:.
How do you make those letters in your HUD?
Would be awsome with an answer! 
HUD options->player preferences->appearance->tick a box "show abbreviations". Now it has the standard abbreviations that HEM has for each stat as default. If you want to change those go back to stats tab and click on a random stat which name you want to change, you'll see at the bottom right corner the abbreviations box where you can change the letters. =)
Posted 9 months ago
Reply to Topic
Reply w/Quote